Water-based epoxy floor paint

Water-based epoxy floor paint

Water-based epoxy floor paint Product overview:

With the constant improvement of the people environmental protection consciousness, not only requires metope paint, Waterborne Epoxy Floor implementation also requires floor waterborne coating system gradually realize to reduce the negative effect on the environment, but the wear resistance of floor coating system is conventional water-based coating cannot be achieved. To thoroughly solve the technical problems, the company USES advanced technology research and development center, adopt special special water-based epoxy resin and curing agent, with special processing technology and the emulsification technology, has developed an excellent environmental performance, has high abrasive resistance and solvent resistance of the waterborne epoxy floor coating system. Waterproof breathable function of the system greatly improves the system applicability of wet subgrade, is all not do the waterproof layer, damp, but at the same time, and have high cleanliness requirements, need to coating epoxy floor coating system places ideal choice.Epoxy Antistatic Floor Coating Paint,Yellow Epoxy Anti-static Topcoat.

Environment-friendly Epoxy Floor Applicable place:

1. Floor of industrial plants such as clothing, tobacco and food;

2. The floors below the first floor (including basement) of water vapor, water seepage and humidity, such as supermarket, parking lot, canteen food, warehouse and other special places.Epoxy Anti - Static Level Coating,Epoxy Topcoat Material.

Water-based Epoxy Resin Product features:

1. Water, solid color and light;

2. Thickness 0.3-3mm;

3. The general service life is 5-10 years.

Waterborne Epoxy Resin Floor Technical parameters:

Technical indicators:
A pilot project	indicators
Drying time,H	Table dry(H)≤4 Action(H)≤24
Pencil hardness	≥2H
Wear resistance (750g/500r, weightlessness, g)	≤0.04
Adhesion, stage	≤1
Compressive strength, MPa.	≥80
Resistance to water	48 hours without exception
Resistance to acid 10%	48 hours without exception
Gasoline, 120#	48 hours without exception
Heat-resistant water	48 hours without exception

Water-based epoxy floor paint Construction procedure:

1,Bottom coating:

1)Use water-based epoxy primer: the main paint and curing agent are mixed in proportion and stirred evenly;

2)Roller evenly, no leakage;

3)The door, wall corner, wall foot, machine foot and so on use hair brush painting.

2,In the coating mortar:

1)Use water-based epoxy primer: the main paint and curing agent shall be mixed with a proportion of 40 ~ 100 mesh quartz sand to mix well;

2)Use the batch knife as a whole for 1 ~ 2 times;

3)After curing, polish the defects such as the scar, and clean up.

3,The putty layer:

1)Use water-based epoxy paint: the main paint and curing agent should be mixed with a proper amount of filler (such as quartz powder and talcum powder) to mix evenly.

2)Use the batch knife to cover 1 ~ 2 times, focusing on filling the holes in the ground;

3)After curing, clean up the defects such as knife marks, vacuum cleaners and dry wet towels.

4,Surface coating:

1)Water-based epoxy finish: the main paint and curing agent are mixed in proportion, stirring evenly, and the water is added to the suitable construction viscosity;

2)Use the prepared roller to coat the top paint, and evenly roll the coating, requiring uniform coating, no leakage, 2 times, or spraying 1 to 2 times.Epoxy Finish Antistatic Material.

Contact us if you need more details on Waterborne Acrylic Paint. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Waterborne Traffic Paint、Water Based Epoxy Resin. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Epoxy Floor Coating System > Waterborne Epoxy Resin Floor