1600W Demolition Hammer
Basic Info
Model No.: OSD65A
Product Description
| Model/ Item no. | OSD:65A |
| Rated Voltage | 220V/230V/110V/127V |
| Rated Frequency | 50Hz/60Hz |
| Rated Input Power | 2200W |
| Cylinder diameter | 50mm |
| Impact capacity | 46J |
| Impact rate | 1600/min |
| Silicon steel material | Cold rolling (BAOSTEEL) |
| Machine size L*H*W | 65x22x11cm |
| Machine net weight | 14.31KGS |
| Packing | 1 metal case /pc, 1pc/ctn |
| Packing size | 71x17x30cm |
| Bearing | CHL |
| Carbon brush | Out power off |
Advantage:
1.The brush holder has rubber against quaking. This could enhance the longevity of carbon brush and motor.
2.New design air compression system could adjust the cylinder air auto and reduce the power loss.
3.Side handle could be adjusted 360℃, so make the machine work more convenient.
Our hammer motor use certificated BAOTEEL 60 cold rolling. Control the source of material strictly.The motor
round wire is thermostable.copper. Commutator use certificated original also. The motor fan is strong air
exhaust design. This logo bearing also use high quality
Demolition hammer is used concrete broken, chipping, digging, cutting and so on.The Impact capacity is
important of demolition hammer.
This capacity more high could give user more easy and fast.
Attention:
1. Check the bit often. If the bit is blunt,pls change the bit or abrade.
2. When machine is working, there is shaking. Please check the screw always.Now we use glue to stick
the screw.So enhance the safety of screws.
3. Far away with power cable and pipeline.
4. Don`t aim other people when machine is working.
5. Remember to add the oil when machine is working.
 |  |
Product Categories : Demolition Breakers > OUSHIDA/WSLN Demolition Breakers